Iai-america SSPDACR Manual de usuario descargar pdf (Pagina 57)

9. Setting the Home Position

(4) Select the axis-specific parameter tab.

(5) In the axis-specific parameter tab, select No. 12, “Preset Home.”

(6) Change the setting of axis-specific parameter No. 12 (Preset Home).

Add or subtract the value measured in (2) to/from the value currently input.

The setting unit is 0.001 mm.

Example: When subtracting 1 mm

Current preset value = Current setting – 1000

(7) Write the new data.

Select Specific Axis.

Select No. 12, “Preset Home.”

Click the SEL button to write the data to the controller.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 115 116

Sin comentarios

Iai-america SSPDACR Manual de usuario Pagina 57