Iai-america PCON-CF Manual de usuario descargar pdf (Pagina 122)

104

7. Operation <Practical Steps>

Position table (Field(s) within thick line must be entered.)

No.

Position

[mm]

Speed

[mm/s]

Acceleration

[G]

Deceleration

[G]

Push

[%]

Positioning

band [mm]

0 * * * * * *

1 150.00 200.00 0.30 0.30

10.00

2 200.00 100.00 0.30 0.30

0.10

T1: 6 msec or more; time after selecting/entering a command position until the start input turns ON

(The scan time of the host controller must be considered.)

Caution: When the start signal turns ON, the position complete output will turn OFF and the moving

output will turn ON.

Always turn OFF the start signal after confirming that the start signal is currently ON and the

position complete output has turned OFF.

Speed

Position 1 Position 2

Position 1

Position 2

Note

Command position

Start

Position complete

Completed position

Moving

Actuator movement

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 225 226

Sin comentarios

Iai-america PCON-CF Manual de usuario Pagina 122