Iai-america PCON-CFA Manual de usuario descargar pdf (Pagina 17)

2. ACON-C/CG, PCON-C/CG

[2] Position/simple direct mode: In this mode, the actuator is operated by specifying position numbers.

You can select whether to specify the target position directly as a value, or use

a value registered in the position data table, by switching a control signal.

For the speed, acceleration/deceleration, positioning band, etc., values

preregistered in the position data table are used. Up to 768 position data points

can be set.

Number of occupied bytes: 4CH

[3] Half direct mode: In this mode, the actuator is operated by specifying the speed, acceleration/deceleration

and push current, in addition to the target position, directly as values.

Number of occupied bytes: 8CH

PLC

䎃

Target position: 100.00 mm

Position No. 0

CON/PCON supporting

DeviceNet

ctuato

eed

cceleration

Deceleration

Push

PLC

䎃

Target position: 100.00 mm

Positioning band: 0.10 mm

Speed specification: 100.0

mm/sec

cceleration/deceleration:

0.30 G

Push current: 50%

CON/PCON supporting

DeviceNet

ctuato

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 265 266

Sin comentarios

Iai-america PCON-CFA Manual de usuario Pagina 17