Iai-america PCON-CFA Manual de usuario descargar pdf (Pagina 90)

4. PCON-CA/CFA

CC-Link

2) Position/Simplified Direct Value Mode : This is the operation method with the position No. set up.

Whether if setup the target position using a value directly by means

of the change over of the control signal, or using the value

registered on the position data, can be selected.

For “Speed”, “Acceleration/Deceleration” and “Positioning Width”,

use the values already registered on the position data. The settable

No. of position data items is max 768 points.

No. of Occupied Stations: One Station

3) Half Direct Value Mode : This is the operation method with the “Speed”, “Acceleration/Deceleration”,

“Pressing Current Value” set up directly using the numerical values, in addition to

the “Target Position”.

No. of Occupied Stations: Two Stations

Target Position : 100.00mm

Position No.0

PCON-CA/CFA

applicable to CC-Link

Actuator

No.

Speed

[mm/s]

Acceleration

[G]

Deceleration

[G]

Pressing

[%]

300.00

0.30 0.30 0

Target Position : 100.00mm

Positioning Width : 0.10mm

Speed Setup : 100.0mm/s

Acceleration/Deceleration : 0.30G

Pressing Current Value : 50%

PCON-CA/CFA

applicable to CC-Link

Actuator

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 103 104

Sin comentarios

Iai-america PCON-CFA Manual de usuario Pagina 90